Tim Holtz *Fragments* and Mini Book

I'm excited to share about Tim Holtz's *Fragments* and this little mini book I made over the weekend - it was my first time working with Tim Holtz's new (semi-new) FRAGMENTS, and it was so fun! Fragments are a very cool tool/embellishment you can use on just about anything.

--They're a part of Tim's Idea-ology line by Advantus, and come in three different varieties. The first one that came out is simply called *Fragments* which contains square and rectangular pieces of clear acrylic tiles in different sizes. The largest is a 3.75" x 3.75" inch square, and the smallest is 5/8" x 5/8" inches. There are also various rectangular pieces, and they're all approximately 3mm thick. You get 48 pieces in one package - it's actually a LOT, and goes a long, long way. You can ink them, stamp on them, drill through them, and glue patterned paper to them! All of these supplies are available at Creative Play Stamps.

More recently Tim has released two other varieties: *Charms* and *Ovals & Circles*. The charms are cool because they're shaped like tags and have holes at the top of each charm. They come in many different shapes - square, round, etc...

Here's a photo of the package:


And a description written on the back of the insert:


You can watch the master himself demo-ing the Fragments:
TIM HOLTZ FRAGMENTS *HOW-TO* VIDEO


For my book, I used 2 of the largest square pieces (3.75" x 3.75") and decorated them with Adirondack alcohol inks (Cranberry, Butterscotch, Red Pepper). (See tutorial on the previous posting). Then I measured and drilled 2 holes in the fragments using a drill bit made especially for using on plastics and acrylics. (If you use a regular drill bit it will crack the acrylic and won't drill through correctly.) Then I just fiddled around with my other new goodies: Tim Holtz's *Sprocket Gears*, *Swivel Clasps* and Keyholes, and pushed them around until I liked how it looked. I also rubber stamped 2 more fragment tiles with permanent *Timber Brown Staz-On* ink and shuffled everything around and around until it looked good. The final step was gluing everything down with Ranger's *Glossy Accents* which Tim Holtz recommends for using with Fragments and his metal embellishments.

close up:


I left the bottom right-hand corner empty so I could place a photo or stamped image on the paper behind it and have it showing through. Neat, huh?!?

top view:


The hot orange rings are by *Junkitz* - I bought them about 4 years ago before they went out of business, and the metal button is also an old one by *7 Gypsies*. I custom-made my own half-pearls by soaking them in Adirondack *Espresso* alcohol ink. The pages of the book are thick paper coasters which I cut down to fit the size of the book.

I'm going to post 2 more projects made with FRAGMENTS over the next week. Stay tuned!

~~~ All supplies are available at: Creative Play Stamps ~~~

***I'm currently trying to fix my blog so that people can leave comments - I didn't realize the template I chose doesn't allow for comments!!!

inspiration for today:
*We need the freedom to discover how God wants us to grow, for his design will not look quite the same for everyone.* - John Ortberg

Read more...

Repost: Alcohol Inking Basics on Glossy Paper

Alcohol Inking Basics on Glossy Paper (this is a repost from my other blog)

[I'm reposting this tutorial on alcohol inking basics because I'm going to post some new projects I did with Tim Holtz's Fragments, which involve alcohol inking]

In order to get really good results with the alcohol inks, I recommend you use the tools that Tim Holtz designed to use with them. Pictured here is the Inking Tool and a pack of Applicator Felt pieces (mini pads).



You will also need glossy paper for artists/crafters. Creative Play Stamps carries the paper by Ranger and the tools/inks as well. --You can't use glossy photo paper, btw - it doesn't work. And finally I highly recommend that you also use Blending Solution, although you don't have to. It just helps spread the ink out instead of leaving pure color blobs. It spreads the color out and blends them -- allowing them to meld together in a natural way.

The inking tool has a wood base and medium sized handle -just the right size to fit it your palm. On the bottom of the base is a strip of velcro that's permanently attached, so you can easily put on and/or take off your felt pad.



Simply place the piece of felt onto the the velcro.



It stays put with just the right amount of clinging. It won't fall off while you're using it, but it's easy to take off as well.



Next, choose your color of ink and gently squeeze. It's very easy to control the amount of ink that comes out - the bottle is designed with the artist in mind, and the needle-nose tip makes it even easier to control the flow of ink. I used the color *Meadow* in this example.



Lift up and repeat it again. Place around 4-7 drops on the pad, depending on how large of an area you need to cover.



Now add a few drops of Blending Solution on top of the color drops. (Using the Blending solution is optional, however if you don't use it all you'll get when you apply it to your project is exactly what you see on the felt pad - little drops of color - there will not be any spreading/blending going on.)



You can see how the color drops and Blending Solution have melded together on the pad.



Now pounce it onto the glossy paper.



Keep repeating until you have good coverage.



You can add another color if you want -- simply add a few drop to the felt. You don't need to use a new piece. I used *Ginger* for the 2nd color.

Just pounce away again.

And Voila! Now you have a wonderful new piece of paper! If you want to add another color, just repeat the step above. Add metallic mixatives to spice it up and give it a little tinge of metal!



A SIDE NOTE *** I did the color in 2 steps, however you can do it in one step -- just put different color drops on the felt at the same time (however many you like, really) and then add the Blending solution and pounce away. The result will be similar.

There have been other methods for laying down the color, some people only pounce the blending solution onto the paper after the inks have been applied, and there are still yet other ways to do it.

Remember, the inks can be used on plastic, metal, glass, and other slick surfaces. The inks were not meant to be used on absorbant papers!

ALL MATERIALS ARE AVAILABLE AT CREATIVE PLAY STAMPS

Read more...

Turquoise Mocs

Here is another Moccasins card I made last week.  I had so much fun with this one too!  This time I used LuminArte's Twinkling H20's to paint in the turquoise mocs.  (I used *Mediterranean Blue*) and the rest of the mocs are colored in with Copics and Shimmerz Paints.  I tried really going Southwest with this one and used my *wooden planks* designer paper, indian beads, and matching ribbon!  I hope u like it!

Here's a close up of the shimmery Twinkling H20's and an even better shot at the Shimmerz I painted on top of the dark brown soles and leather laces.  I wanted to brighten them up since the moccasins are shimmery too.  I used *Candle Light* Shimmerz over dark brown Copic markers.

 

I painted over my foam American Crafts thickers alphabet letters that were lime green - I used a turquoise colored paint and then after they dried I applied some 

Distress Stickles over them.  It's so neat how it looks like chunks of antique broken glass.

Here's a close up of the beads on the safety pin, pinned to the side of the ribbon.  I found the safety pins at a huge new dollar store called *Daiso* which originated in Japan.  You can find everything there - most items are only $1.50!  I found these pins in the sewing section and they say *Black* safety pins but they look more like antiqued pins - I thought they were perfect for using on my vintage-y cards!

Thanks for stopping by!

Supplies:

Stamps:   I Brake For Stamps Large Moccasins, Stampin' Up retired sentiment 

Papers:   White Cascata Cardstock, *Barnwood* dp by Hot off the Press

Inks/Markers:   Copics

Accessories:  Spellbinders Labels Four, ribbon, Prima Forever Flowers Daisy in Copper, Twinkling H20's, Shimmerz (see links above)b

Read more...

Southwest Moccasins

I fell in love with this stamp when I saw it at *I Brake For Stamps* a couple weeks ago.  Even though I'm not American-Indian there was something about this stamp that made me just have to buy it!  I also usually wait a while to make stuff after I've received an order, but I immediately stamped this out onto cardstock soon after it arrived - I just couldn't wait to get creative with it!  When I was very little I had a pair of moccasins - they didn't quite look like these, but I remember how much I loved them!  Brings back warm memories for me :) !

There is a huge selection of all kinds of images at I Brake For Stamps.  They have lotsa different themes and styles, the selection is endless.  (All the stamps are unmounted).  The owner Della, also has an I Brake For Stamps Yahoo Group where you can get inspiration and all the latest news on her products!

Supplies:

Stamps:   I Brake For Stamps Large Moccasins, The Angel Company *Just Be You* 

Papers:   White Confetti Cardstock, White Cascata Cardstock, various solid-colored cardstock, Fancy Pants *Meadow*

Inks/Markers:   Copics, Marvy Metallic Marker in Gold, Tim Holtz distress inks

Accessories:  Spellbinders Double Ended Tags, Stampin' Up gingham ribbon, Prima Forever Flowers Daisy in Copper, copper brads, sponges

Read more...